| |
| |
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
emPower
|
|
| |
|
|
| |
The emPower eval board provides a comprehensive
set of SEGGER’s middleware, accelerating the start
of any embedded project. SEGGER’s embOS real-time operating
system is at the heart of the evaluation. Furthermore,
evaluation versions of the file system emFile, graphics
library
emWin,
emUSB Host &
Device, and TCP/IP
stack
embOS/IP
(including web server
demo) enable full use of the
available emPower peripherals.
emPower also features a
J-Link
OB, an on-board version of SEGGER’s market-leading debug probe J-Link.
|
|
|
|
|
| |
|
|
| |
There are three expansion interfaces to easily connect
additional modules. Each connector provides I2C, SPI, UART,
GPIO/timer, analog input and power. A display adapter
connector enables the connection of small TFT displays.
The emPower board is powered by USB only. Current
consumption drawn strongly depends on the application and
connected peripherals. Idle consumption is approx. 85 mA.
|
|
| |
|
|
| |
Controller:
|
|
| |
|
|
| |
CPU:
|
|
| |
|
|
| |
Board main features:
- NXP Kinetis K66 MCU (MK66FN2M0VMD18) 180MHz, ARM Cortex-M4
- 1.8" LCD module (resolution 160x128)
- External debug interface (19-pin Cortex-M); incl. trace
- Display adapter connector (5 V/3.3 V, SPI, PWM for backlight control)
- 100 Mbps fast Ethernet
- USB device: High speed, B-type connector
- USB host: Full speed, providing USB supply to device, A type receptacle (for
directly plugging in A type devices/modules)
- NAND Flash 1GBit
- 3 expansion interfaces providing I2C, SPI buses, UART, CAN, GPIO/timer,
analog input, power, compatible with 3.3V SExI modules.
- microSD card connector
- Joystick 4(+1)-way, 1x "FIRE" button, 1x RESET button
- Rotary input (potentiometer to ADC)
- LEDs: 4x bicolor
- Pin headers for spare MCU signals
- On-board debug probe J-Link-OB (STM32F072, mini A/B-type connector); SWD/SWO
only, no VCOM port support
- Configuration free: no shorting links or solder jumpers required
- Dimensions 99 mm x 80 mm
|
|
| |
|
|
| |
Controller main features:
- 180 MHz ARM Cortex-M4 based core with DSP instructions and
Single Precision Floating Point unit
- 2 MB program flash memory
- 256 KB RAM
- 4 KB FlexRAM
- Memory protection unit with multi-master protection
- 48 MHz internal reference
- Hardware random-number generator
- Supports DES, AES, SHA accelerator (CAU)
- Two 16-bit SAR ADCs and two 12-bit DAC
- Ethernet controller with RMII interface to external PHY and
hardware IEEE 1588 capability
- USB high-/full-/low-speed On-the-Go with on-chip high speed
transceiver
- USB full-/low-speed OTG with on-chip transceiver
- CAN, SPI, I2C and UART modules
- Secure Digital Host Controller (SDHC)
|
|
| |
|
|
| |
|
Product
|
Supported Features
|
|
embOS
|
Core
,
Profiling
|
|
embOS/IP
|
BASE
+
FTP Server
,
FTP Client
,
NetBIOS Name Service
,
Web Server
,
SMTP Client
,
embOS/IP driver for Freescale
Kinetis K60/K70
|
|
emFile
|
BASE
+
Journaling
,
Encryption
,
MMC/SD
,
NAND
|
|
emModbus
|
Master
+
Slave
|
|
emUSB-Device
|
BASE
+
Bulk
,
MSD
,
CDC
,
MSD-CDROM
,
Printer Class
,
MTP Class
,
Target driver for Freescale
Kinetis K60/K70 HighSpeed (EHCI)
|
|
emUSB-Host
|
BASE
+
Printer Class
,
CDC
,
Freescale Kinetis FullSpeed
driver
|
|
emWin
|
BASE
+
Simulation
,
WM/Widgets
,
Memory Devices
,
Antialiasing
,
VNC Server
,
Bitmap Converter
,
Font Converter,
GUIDRV_Flexcolor
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
| |
|
|
|
|
|
