| |
|
|
| |
|
|
| |
|
|
| |
Carrier boards for the NVIDIA Jetson NX compute module
|
|
| |
|
|
|
|
| |
|
Model
|
Support
ed
Jetson
|
USB Po
rts
|
Ethernet Ports
|
Cooling System
|
Camers (MIPI)
|
Other Interfaces
|
|
JNX22
|
Xavier NX / Nano |
2 |
2 |
Fan |
— |
M.2 |
|
JNX30
|
Xavier NX / Nano |
3 |
1 |
Fan |
4 |
HDMI, M.2, PCIe x
4, POE |
|
JNX80
|
Xavier NX / Nano |
2 |
1 |
Fan |
2 |
2x CAN, UART,
HDMI |
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
JNX30-PD (PoE-PD) carrier for Nvidia Xavier NX
The JNX30 is a compact carrier board for the Jetson Xavier NX (and Nano). It
supports the MAXN mode of the Xavier NX and adds CAN and PCIe x1 (compared to the
JN30).
The JNX30 is also available as low cost version (JNX30-LC). The
JNX30-LC-PD version adds powering by PoE from a network switch (PoE-PD: 802.3at) and a
micro SD card. The full version of the JNX30 is available in 2 flavours: PoE-PD (powered
device) to be powered by a network switch or PoE-PSE
(power sourcing equipment) to power a network IP
camera.
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
| |
JNX30-LC carrier for Nvidia Xavier NX
This new JNX30-LC carrier board turns the Jetson Xavier NX compute module into a
super mini-computer. The JNX30-LC supports easy automatic flashing (just connect the USB
OTG cable). The JNX30-LC and JNX30-LC-PD are in stock now.
The JNX30 standard version is available here. The JNX30-LC-PD version adds powering by
PoE from a network switch (PoE-PD: 802.3at) and a micro SD card. The full version of the
JNX30 is available in 2 flavours: PoE-PD (powered device) to be powered by a network
switch or PoE-PSE
(power sourcing equipment) to power a network IP
camera.
|
|
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
ES-JNX80/ES-J180 embedded system for dual NVIDIA Jetson Nano/Xavier NX/TX2
Jetson Nano/Xavier NX/TX2 dual embedded system with integrated 5 port GbE switch. 2 HDMI
and 2 USB 3.0 ports (one port routed to each module). 1 GbE RJ45 port as uplink. 2 GbE
ports to each module plus 2 spare GbE ports for internal expansion.
- 2 x JNX80 for NVIDIA Jetson Nano (ready for Xavier NX)
- 2 x J180 for NVIDIA Jetson TX2
- or mixed: with 1 x JNX80 and 1 x J180
- optional with UPS supercap board
Note: the pictures show the prototype case with a 3D printed front plate. The
production version will have an aluminum front plate. Availability: beta prototypes
now, production version in March 2020.
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
| |
ES-JNX30 embedded system for NVIDIA Xavier NX
The barebone system includes: JNX30 carrier board, passively cooled aluminum case
(135x109x50mm), leaf spring, heat spreader and mounting material. With a small NRE
charge the front plate may be customised.
JNX30 specific front plates will be available soon.
|
|
|
|
| |
|
|
| |
|
4 versions
|
Jetson Xavier NX module
|
flashing service
|
carrier
|
| embedded system |
Jetson Xavier NX module installed |
ready to boot
(OS installed) |
JNX30 |
| bare bone |
without compute module
(install your Xavier nx production module) |
flash yourself |
JNX30 |
|
|
| |
|
|
| |
|
Add on modules
|
Features
|
|
U110 (38363)
|
4x USB 2.0 to
100bT Ethernet with 26W PoE PSE
4x Ethernet ports
3 connector options: RJ45, IX or JST-GH) |
|
U100 (38372)
|
2x M2 (LTE and
WIFI) and 2x USB 2.0 JST-GH |
|
U120 (38385)
|
4x USB 2.0 type A |
| 38391 |
dev kit camera
module and 2x GbE (i210 – JST-GH) |
| 38392 |
dev kit camera
module, 1x GbE (i210 – JST-GH) and mini UPS controller
(supercaps) |
|
|
| |
|
|
| |
The mini UPS
controller supports 4 supercaps (25F to 70F) to power the
unit up to a few minutes for a graceful power down in case
of a power outage. The modules above may optionally be
installed in the aluminum housing and the additional
connectors are brought out on the back plate. These
embedded systems are special order items. Please contact
Auvidea sales for pricing and availability. |
|
| |
|
|
| |
| |
LC
|
LC-PD
|
POE-PD
|
POE-PSE
|
|
Power In |
12V |
12-48V |
12-48V |
12-48V |
| GbE (PoE) |
1x GbE |
1x GbE (PoE PD) |
1x GbE (PoE PD) |
1x GbE (PoE PSE) |
| Display Port |
– |
– |
1 |
1 |
| HDMI |
1 |
1 |
1 |
1 |
| USB 3.0 |
1 type A |
1 type A |
1 type A |
1 type A |
| USB 2.0 |
2 (micro USB and
JST-GH) |
2 (micro USB and
JST-GH) |
2 (micro USB and
JST-GH) |
2 (micro USB and
JST-GH) |
| automatic
flashing |
yes |
yes |
yes |
yes |
| M.2 NVME 2230 –
2280 PCIe x4 slot |
no |
no |
yes |
yes |
| CSI-2 |
2 |
2 |
4 |
4 |
|
|
| |
|
|
| |
A power supply is
optional. Please select one with 5.5/2.5mm power plug and
the appropriate voltage and power rating. The PD (powered
device) version supports PoE (power over Ethernet) to power
the this embedded system from an Ethernet switch. The PSE
(power sourcing equipment) version powers a PoE device such
as a network camera (max 13W). |
|
| |
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
JNX22 carrier for NVIDIA Jetson Xavier NX
The JNX22 is a compact carrier board for the Xavier NX (and Nano). It is designed
for embedded systems without monitor. 2 network interfaces support a network uplink and
the connection of a network IP camera. This may be powered via PoE-PSE. Optionally the
entire system may be powered via PoE-PD. LTE and Wifi may be added with U100 module. A
typical application is a license plate recognition system (ALPR).
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
| |
JNX30-LC-PD Carrier Board for NVIDIA Jetson Xavier NX
The JNX30-LC-PD is a compact carrier board for the Jetson Xavier NX (and Nano). It
supports the MAXN mode of the Xavier NX and adds CAN and PCIe x1 (compared to the JN30).
A special feature is the PoE PD function. That means that the JN30B-LC-PD can be powered
by power over ethernet.
The JNX30 is also available as low cost version (JNX30-LC). The JNX30-LC-PD version adds
powering by PoE from a network switch (PoE-PD: 802.3at) and a micro SD card. The full
version of the JNX30 is available in 2 flavours: PoE-PD (powered device) to be powered
by a network switch or PoE-PSE
(power sourcing equipment) to power a network IP camera.
|
|
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
| |
| |
ES-JNX22 embedded system for NVIDIA Jetson Xavier NX
The JNX22 is a compact carrier board for the Xavier NX (and Nano). It is designed for
embedded systems without monitor. 2 network interfaces support a network uplink and the
connection of a network IP camera. This may be powered via PoE-PSE. Optionally the
entire system may be powered via PoE-PD. LTE and Wifi may be added with U100 module. A
typical application is a license plate recognition system (ALPR).
Cost reduced LC variations will be available soon.
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
| |
|
|
