The SF100 is a high speed "In System
Programming"
programmer to update the SPI Flash soldered on board or Freescale MCU
using Ezport. The programmer is easily controlled by the computer
DediProg Software through the USB bus offering a friendly interface and
powerful features to users.
The SF600 is a high speed "in System
Programming"
programmer to update the SPI Flash soldered on board (In-Circuit
Programming) or in the socket adaptor (Offline programming). The
programmer is easily controlled by the computer DediProg Software
through the USB bus offering a friendly interface and powerful features
to users.
SF600 combines the advantages of SF100 with additional improvements:
High-speed USB and higher SPI performances.
SF600Plus is high speed "in System
Programming"
programmer to update the SPI Flash soldered on board (In Circuit
Programming) or in the socket adaptor (Offline programming). The
programmer is easily controlled by the computer DediProg Software
through the USB bus offering a friendly interface and powerful features
to users.
SF600Plus combines the advantages of SF100 with
additional improvements: High-speed USB and higher SPI
performances.SF600Plus is an upgrade version of SF600. The main
difference is that SF600Plus embeds an 8GB memory, which allows
standalone programming.
SF700 is an ALL new designed SPI Flash engineering
programmer, which supports all SPI NOR Flash and SPI NAND Flash in the
market.
SF700 continues to provide strong engineering mode and command line as
SF600, DediProg's another programmer, to satisfy the demand for R&D.
Apart from the engineering application, SF700 also supports project file
for small volume production demand. SF700 can do programming in parallel
with multiple programmers or standalone mode.
EM100Pro-G2 is DediProg SPI NOR Flash emulator
integrated high-speed DRAM memory to offer the best code updating
performances. This advanced tool has been designed in close cooperation
with the SPI NOR Flash suppliers to emulator the behavior of all the SPI
NOR Flash on the market and also the next generation SPI NOR Flash.
It provides engineers with a flexible development and testing tool for
any embedded project that uses an external SPI NOR Flash. It provides
quick, in-circuit firmware test cycles during development.
Update your SPI Flash soldered on your application
board by using our dedicated programmers: SF100 and SF100+. When
connected to the application board, the SF100 programmer can control the
SPI bus to read or update the Serial Flash content in a very short time.
SPI Flash Development kit gives engineers the
total solution while working on firmware development based on the SPI
flash memories. This kit combines all the accessories of EM100Pro-G2 and
SF100 and gives the users greater price advantages than purchasing
separately. For more information, please visit SF100 and EM100Pro-G2
product page.
SPI Flash Development kit gives engineers the total solution while
working on firmware development based on the SPI flash memories. This
kit combines all the accessories of EM100Pro-G2 and SF600 and gives the
users greater price advantages than purchasing separately. For more
information, please visit SF600 and EM100Pro-G2 product page..
NuProg-E2 is an universal engineering programmer.
Widely supports most IC types on the market, UFS, eMMC, MCU, CPLD, FPGA,
SPI NOR, SPI NAND, Parallel NOR, Parallel NAND and EEPROM, etc. And also
support different types of IC packages: CSP, BGA, QFN, QFP, SOP, TSOP,
SSOP, PLCC, DIP, etc. Designed FPGA kernel architecture supplies ultra
high speed programming performance. The Programming project and sockets
are compatible with NuProgPlus. Together with built-in SuperSpeed� USB 3.0
for high-speed communication, it is an efficient tool for you to focus on
application analysis and product development.
NuProgPlus Series is the powerful universal
programmer which is capable to support EEPROM, Flash, MCU, eMMC, UFS,
PCI-E SSD, and CANbus devices programming. It can also support PCI-E,
eMMC and UFS device duplicating. With the all newly designed FPGA kernel
architecture, NuProgPlus Series can support 16 SPI Flash programming or
16 eMMC/UFS IC duplicating in parallel. NuProgPlus-U8 is the manual
operation model of NuProgPlus Series. With the project file(s), the user
can use the LCD and keypad to operate the programming or duplicating
without PC. It supports Hand Press Fixture (Option) to help the user to
pick and place the IC easily.
NuProgPlus Series is the powerful universal
programmer which is capable of supporting EEPROM, Flash, MCU, eMMC, UFS,
PCI-E SSD, and CANbus devices programming. It can also support PCI-E,
eMMC and UFS device duplicating. With the all newly designed FPGA kernel
architecture, total sockets can be extended up to 16 SPI Flash
programming or 16 eMMC/UFS IC duplicating in parallel. NuProgPlus-U16 is
the manual operation model of NuProgPlus Series. With the project file(s),
the user can use the LCD and keypad to operate the programming or
duplicating without PC. Hand Press Fixture is an option accessory to
help the user pick and place the IC easily.
StarProg-F is an engineering FLASH IC programmer
supports a variety of FLASH IC on the market, like EEPROM, SPI NOR/NAND
FLASH, Parallel NOR/NAND Flash, eMMC/eMCP, etc. Powered by USB port and
does not need external power.
StarProg-F provides users Command Line for software redevelopment. Palm
size and space saving. Whether engineering development or low volume
production, StarProg-F offers user the best solution. This programmer
programs the IC through DediProg designed socket adaptors.
K110 is an engineering IC programmer that supports
the majority Flash ICs on the market. Powered by USB port and does not
need external power, also provides Command Line for software
redevelopment. Palm-size and space saving. It provides online or offline
Flash IC programming through the different adaptor.
K110 offers user the best solution for development and low volume
production.
NuProgPlus Series is the powerful universal
programmer which is capable of supporting EEPROM, Flash, MCU, eMMC, UFS,
PCI-E SSD, and CANbus devices programming. It can also support PCI-E,
eMMC and UFS device duplicating. With the all newly designed FPGA kernel
architecture, total sockets can be extended up to 16 SPI Flash
programming or 16 eMMC/UFS IC duplicating in parallel. NuProgPlus-U16 is
the manual operation model of NuProgPlus Series. With the project file(s),
the user can use the LCD and keypad to operate the programming or
duplicating without PC. Hand Press Fixture is an option accessory to
help the user pick and place the IC easily.
ProgMaster-U8 is a gang programmer with ultra high
speed, which supports all IC families on the market. Equipped with 8
programming sites with an LCD keypad that allows stand-alone function.
ProgMaster-U8 has been designed and optimized to reach IC maximum
performances without compromise on the programming quality, stability,
and reliability and making it the best value for mass production.
StarProg-A supports MCU, CPLD, SPI NOR Flash, SPI
NAND Flash, and EEPROM on board programming (ICP/ISP). It is optimized
for the integration of automated machines and can be easily used in
development and mass production
StarProg-U is an engineering universal IC
programmer which supports a variety of IC on the market, like EEPROM,
SPI NOR/NAND FLASH, Parallel NOR/NAND Flash, eMMC/eMCP, Microcontroller
(MCU), etc. Powered by USB port and does not need external power.
StarProg-U provides users Command Line for software redevelopment. Palm
size and space saving. Whether engineering development or low volume
production, StarProg-U offers you the best solution. This programmer
programs IC through DediProg designed socket adaptors.
